I am nearing the end of my dotty trail,
hope you like this one.
Not sure what I am going to tackle next month....guess it will have to be a surprise.
hope you like this one.
Showing posts with label Clear Cards. Show all posts
Showing posts with label Clear Cards. Show all posts
Wednesday, May 30, 2012
Monday, December 12, 2011
card a day --13
 |
| From Dec 12a, 2011 |
I used a retired CTMH stamp set for this card
 |
| From Dec 12a, 2011 |
Stamp images on white cardstock
and mat as shown
 |
| From Dec 12a, 2011 |
I know I say this every time, but
It is very important to remove the protective film from both sides of the card before you adhere anything.
Adhere the 5 1/2 strip to the inside (outside edge) of the card as shown.
(Note if you dont want the adhesive to show, adhere the mat to the back of the card and then adhere the patterned paper on the inside)
 |
| From Dec 12a, 2011 |
adhere the sentiment to the inside of the card as shown
 |
| From Dec 12a, 2011 |
Final Step
Close card, adhere image to front of card.
(center it over the mat on the inside)
 |
| From Dec 12a, 2011 |
View of the card open.
I appologize for the poor picture quality, but my editing software was giving me grief, so I quit fighting with it and just posted the pic as is.
Saturday, December 10, 2011
card a day --12
 |
| From Dec 10 a, 2011 |
This is another clear card, that I have previously posted,
but now I am sharing the instructions with you
These are the pieces you will need.
Note: I have used a retired Close to my Heart stamp set and paper pack.
 |
| From Dec 10 a, 2011 |
Stamp your images on the white card stock and mat as shown
Leave one 2 1/2 x 1 1/2 white piece blank
 |
| From Dec 10 a, 2011 |
VERY< VERY Important...remove protective film from both sides of your clear card
Then
Adhere the 4 1/4 rectangle to inside of card (about 1/2 inch from inside edge)
 |
| From Dec 10 a, 2011 |
Close card
Center stamped & matted image over 4 1/4 rectangle
Adhere to front of card as shown
 |
| From Dec 10 a, 2011 |
Open card.
Adhere second retangle (with sentiment stamped on it) 3/4" from the top and flush with the outside edge.
As shown.
 |
| From Dec 10 a, 2011 |
Close card.
Center snowflake stamped image over sentiment (so you can't see it)
Adhere to front of the card.
 |
| From Dec 10 a, 2011 |
Add some Bitty Sparkles to the snowflakes.
 |
| From Dec 10 a, 2011 |
Open card
Adhere blank white cardstock to the inside of the front of the card
(This will give you a place to write your own personal message)
Voila!!
 |
| From Dec 10 a, 2011 |
12 days of Cricut--6
 |
| From Dec 10, 2011 |
I used the same recipe for this card as I did in the Card Challenge #11
However, I used the
Elemental paper X7141B
Snow Flurries D1384
and cut the snowflake #1 (p.23) @ 2" and 1 1/2"
I also added some sparkles to it
card a day --11
 |
| From Dec 10, 2011 |
I have actually posted this card before, but here is how to make it
Cut out pieces as displayed above
 |
| From Dec 10, 2011 |
 |
| From Dec 10, 2011 |
attach flower to 6 1/2" piece of ribbon
 |
| From Dec 10, 2011 |
attach the ribbon to the 5 1/2" piece of patterned paper--set aside
(ignore the scribbles in the corner of the photo)
 |
| From Dec 10, 2011 |
Very, very important....remove protective film
from inside and out of the clear card.
attach the solid colored cardstock to back of card
(about 1/2" from side)
 |
| From Dec 10, 2011 |
attach the patterned paper to the inside of the card
(if you do it this way you can "hide" your adhesive)
 |
| From Dec 10, 2011 |
 |
| From Dec 10, 2011 |
attach matted sentiment to inside of card.
 |
| From Dec 10, 2011 |
Okay,
now find that 1" strip of patterned paper that you put aside, mat in on the cocoa
and adhere it to the front of the card.
(note, if you want to hide your adhesive, adhere the cocoa to the inside of the front cover and then adhere the striped piece to the front)
Saturday, November 5, 2011
Friday, November 4, 2011
Thursday, November 3, 2011
Subscribe to:
Posts (Atom)